800 WATT 3 Blades WIND TURBINE

800 Watt plus potential power low wind turbine for home, business, or remote use.
Uses: Battery or battery bank charging, stackable wind turbine grid tie inverters, direct DC water heating elements, direct DC resistive heating, or other applications where 3 phase AC or DC can be used. 
Note: If you are replacing a DC output wind turbine with our 3 phase turbine and do not want to change your DC wiring then you can mount the bridge rectifier at the top of the tower for a DC run down. 

- Can produce up to 1600 watts in higher winds 
- True new N45 7 magnet 14 pole Renegade PMA for efficient three phase power generation. 
- Rain and ice proof. 
- Comes with Falcon Mach III blades. 
- Mounting Bracket and Heavy Duty 2 arms tail assembly 
- Tail fin measures 9" wide x 28" tall for maximum tracking with Missouri Wind logo laser cut into tail fin
- Three phase bridge rectifier for converting to DC output 
- No slip rings to fail or replace. Wire tension system. 
- Mounting bracket fits on 1.5" schedule #40 or #80 pipe. 
- 125,000 hours+ of rated bearing life. . 
- Large 62" swept area (DIA.) 
- Heavy duty hb spacer/stabilizer. 
- comes unpainted 
- 1 YEAR LIMITED WARRANTY 

Overall turbine length 46" Overall blade diameter 62" 

To obtain maximum output from our wind turbines your tower should be a minimum of 60 foot high preferably in a clearing, free from obstructions like buildings and trees. Your wind turbine should be above tree tops and buildings. RULE , the higher the better. Even though you may not be able to have a tall tower decent power is still obtainable on roof tops and short towers . One small wind turbine probably cannot equal the output of 10 solar panels. Our wind turbines do not furl which means they can keep producing power in high winds unlike turbines that are designed to shut down at 30 mph using an electrical brake or furling. Our wind turbine blades are self regulating and have been tested to 125 mph winds. Less blades equal higher rpms ,more output but higher winds for startup. More blades equal lower wind speed startups but less output in higher winds. Our wind turbines perform the best in wind zones 2 to 7. Our wind turbines are capable of producing 500 to 2000 watts plus instantaneously in higher wind gusts. If your intending on installing your wind turbine in a low wind area or in a bad location such as behind a building it will still work for battery charging, or grid feeding etc..., however just at a lower rate and time. 
The turbine comes with: blades and hub assembly, pma, bridge rectifier, mounting bracket, tail arms, tail, and the hardware to bolt those components together and does not come with cable, charge controller, tower, or any other accessories for using or installing the wind turbine.